One Light 360° Vehicle Compliance Check
Last updated: 20/09/2024
Vehicle Compliance Check
Follow this 4-step guide to easily install your One Light 360° roof tent:
Step 1: Preparation
- Make sure your vehicle’s roof bars are secure and properly installed.
- Prepare all necessary tools and parts for installation.
- Read safety instructions before beginning installation.
Step 2: Positioning the Tent
- With a helper, install the One Light 360°
- Place the tent on the roof of your vehicle.
- Carefully place the tent on the roof rails.
- Make sure the tent is in the correct position in relation to the roof of the vehicle.
Step 3: Securing
- Place the securing brackets on the roof rails and the tent base.
- Secure the tent to the roof rails by tightening the 8 nuts.
- Make sure all connections are tight and secure.
4. Step: Check and Test
- Check that the tent is securely assembled.
- Open and close the tent to make sure the mechanism is working properly.
- Re-tighten the connections if necessary and perform a final safety check.
Note: The installation process takes approximately 30 minutes. If you encounter any issues or need assistance, please contact our product experts.